Electronicfr.com

Part 1 : How to build a USB device with a PIC 18F4550 or 18F

Results 6 - 10 of 13

Posted by azam, on 20-06-2008 13:20, IP 219.95.22.89

6. ICSP

may i know detail of the ICSP ,

- the manufacturer
- model number

» Report this comment to administrator

» Reply to this comment...

Posted by azam, on 09-07-2008 17:49, IP 60.50.182.134

7. Components used

Can someone help me to recognize the value of capacitor connected to the LED, and also the component label with " SL1 " . One more thing, how to connect the power supply to the PIC and how about the jumper connection, because in the schematic there are no connection to the PIC

really need a help,hope someone can help me

» Report this comment to administrator

» Reply to this comment...

Posted by Thilo, on 12-07-2008 22:45, IP 93.133.120.133

8. Nice article

Thanks for sharing your knowledge with us. I will try to build a LED blinking board as my very first Microprocessor driven circuit :)

» Report this comment to administrator

» Reply to this comment...

Posted by eng_eman, on 18-07-2008 18:52, IP 86.108.120.156

9. usb

i'm doing aproject uing pic18f4550 and i needed to store the information that come from thpic after processing to a usb flash and i need to know how the pic 18f4550 can write on the usb flash i means i need a method to make a communication between pic18f4550 and usb flash via usb interface.
thanks a lot

» Report this comment to administrator

» Reply to this comment...

Posted by Joseph Bachor, on 13-10-2008 00:08, IP 74.0.13.217

10. ENG

Does anyone have a free example of Windows C++ source code to display data derived from usb devices to an on screen graphic such as a bar graph or analog meter? If so reply to: ejoee@juno.com

» Report this comment to administrator

» Reply to this comment...

<< Start < Prev 1 2 3 Next > End >>

Go back to the article

Electronicfr.com

Main Menu

Search